Starting using a cocktail fountain

You bought a cocktail fountain ? it's time for the installation

How to set up the cocktail fountain?

Here are a few tips for installing the cocktail fountain. When you receive your order, a leaflet is enclosed with your parcel: it summarises the information you need to start using the punch fountain, and also gives you advice on how to clean your fountain.

1. Place the cover on the circular rubber seal.

2. Fill in the bowl with the drink (which you should have stored in a cool place before): at least 5 cm of liquid is needed in the bottom of the bowl to allow the pump to work. Do not fill to the brim. Do not place pieces of fruit in the fountain, nor any gaseous drink : the liquid may lose its gas, but bubbles may also interfere with the operation of the pump.

3. Connect the lighting cord (plug and socket), then connect the two plugs (motor and light) to the power sockets.

The carrying wood box is sold separately for the 15 L cocktail fountain; the 32 L cocktail fountain is always delivered with the box (the wood box is included). This wooden box, which facilitates the transport of the fountain, especially if you rent the fountain for receptions, can also be used as a display stand for the fountain; you can decorate it or dress it up with a piece of fabric.